Tarmac Driveways in Derby (Who Actually Call You Back)
A smooth, solid drive in one day’s work, rolled while the tarmac is hot.
✔ Free estimates
✔ On-site from start to finish
✔ Priority warranty scheduling
Open Monday to Saturday, 8am-6pm
Get Your Free Fence Estimate
Tarmac for Derby Drives
Get a drive with one smooth, continuous surface that sheds rain and takes daily traffic. There are no joints to weed and no blocks to shift, and the dark finish hides tyre marks and oil.
At Derby Driveways Direct we lay tarmac for homes in Allestree, Mickleover, Alvaston, Spondon and across Derby, and we work in Derbyshire, Nottinghamshire and Leicestershire too. We build the base, lay the tarmac hot and roll it before it cools.
Why Tarmac Drives Crack and Pothole
You want a surface that stays smooth for years. Tarmac does that when the layers under it are right. When the base is thin or not compacted, the surface cracks along wheel lines and the edges crumble.
Water gets into every crack, and the next frost opens it wider. A small split turns into a pothole, and a pothole turns into a patch that shows.
Settle it at the start and the drive is laid once. We dig to the depth your drive needs, compact the sub-base in layers, support the edges and roll each layer of tarmac while it is hot.
Why Choose Tarmac
One seamless surface
You get a drive with no joints between blocks, so there is nothing for weeds to grow through. A brush and a hose keep it clean.
A finished drive in a short job
Your drive goes from dug up to laid without long gaps. Tarmac is laid hot and rolled in one visit once the base is ready, so the disruption stays short.
A dark finish that hides wear
Tyre marks and drips blend into the surface, so the drive looks tidy between cleans. The dark tone also sets off a lawn, a wall and a front door.
Repairs that match the job
You can fix a damaged patch without relaying the whole drive. The area is cut back to sound tarmac, the base is checked and new material goes in.

Services That Go With Tarmac
Tarmac on Derby’s Red Clay
Ground decides how long a tarmac drive stays smooth. Much of Derby sits on red, clay-rich ground that the British Geological Survey maps as Mercia Mudstone. Clay-rich ground like this can shrink in dry spells and swell when it is wet.
Tarmac is a flexible surface, so it follows the ground under it. A base sized to your ground and compacted in layers keeps that movement small. A thin base lets the surface crack along the line where the ground moves.
Clay also drains slowly, so rain needs a planned way out. That is a fall to a drain or a border, set before the tarmac goes down.
What Happens After You Get In Touch
Three steps, in this order. You know what comes next at every stage.
- You get in touch. Send the short form or call. We can call you back and ask a few questions first, so we know where the drive is and what you want on it. Estimates are always free.
- We visit. We prefer to come over to you to see the job, because measurements, levels, drainage and access are visible on site. You choose the finish and the edging, and your quote follows after the visit.
- We build, you approve. Work starts when you approve the plan. The ground is dug to depth, the base is compacted in layers, the tarmac is laid hot and rolled, and the edges are finished. We tidy the work area when we finish.
What a Tarmac Drive Includes
Levels and falls. Heights and falls are set out first, so rain runs off the surface and away from the house.
Dig and sub-base. The old surface comes out where needed and the ground is dug to the depth your drive needs. The sub-base goes in and is compacted in layers.
Edging. Edging along the open sides supports the tarmac, so the edges do not crumble under wheels.
Binder and surface layers. A stronger layer goes down first to carry the load. The surface layer follows, and each layer is rolled while it is hot.
Finish at the edges. Joins at the house, the gate and the kerb line are finished by hand, so water cannot sit against them.
Choosing Your Tarmac Finish
Tarmac gives you fewer choices than blocks, and each one has a clear job.
Standard black. The classic finish. It suits most Derby homes and hides marks well.
Edging. A kerb or a block edge frames the drive and marks the line along the lawn or the path.
Porous option. Porous asphalt lets rain drain through the surface. It changes the planning position, which is covered below.
Borders and paths. A paved border or a path beside the drive gives you a firm step from car to door.
Base, Layers and Edges That Hold
A tarmac drive is only as good as the layers under it. At Derby Driveways Direct we choose each layer for the job.
Sub-base.
It carries the weight of the cars, so it is sized to your ground and compacted in layers.
Binder layer.
A coarser layer spreads the load from the wheels across the base below.
Surface layer.
A finer, tighter layer gives the smooth finish you see and keeps water out of the layers below.
Edging.
It supports the outer edge, where tarmac is weakest, so it does not break away under wheels.
Falls and drainage.
A planned fall carries rain to a drain or a border, so it does not sit on the surface.
Rules to Know Before You Lay Tarmac
Know the rules before you lay and the drive goes down once. Derby City Council is the planning authority for Derby, and the Planning Portal sets the national rules for front gardens.
Standard tarmac counts as a hard, non-porous surface. Laying more than 5 square metres of it in a front garden needs planning permission, unless rain drains to a lawn or border.
Porous asphalt changes the rule. The Planning Portal lists porous asphalt among the permeable surfaces that need no planning permission at any size. If you want the surface to stay black but skip the planning step, ask about it at the visit.
A free utility search. LSBUD runs a free search that shows underground pipes and cables near your property. Not every asset owner is a member, so treat a search as a good start and tell us about anything you know is buried.
Your address decides the council. Derby City Council covers the city. A drive in Derbyshire, Nottinghamshire or Leicestershire falls under a different council, so the first question is which council covers your address.
Tarmac in Derby and the Areas Around It
You get the same visit whether your drive is in Allestree, Mickleover, Alvaston, Spondon or elsewhere in Derby. Tell us where the drive is, and the visit starts from there.
Looking After a Tarmac Drive
A tarmac drive stays smooth with a few small habits. Each one takes minutes.
Sweep it. Leaves and grit hold moisture against the surface. A quick sweep keeps it clear.
Clean up spills. Fuel and oil soften tarmac. Wipe them up soon and the surface stays firm.
Protect the edges. Avoid driving over the very edge of the drive. Edges break first.
Fill small cracks early. A sealed crack keeps water out, so frost has nothing to open.
Spread the load. Use a board under a jack or a trailer stand. Point loads leave dents in warm weather.
What Moves the Price of a Tarmac Drive
Size sets most of the price. After that it comes down to how deep the ground has to be dug, the thickness of the layers, the edging and what has to come out first. Access matters too: how easily lorries and a roller can reach the drive.
Estimates are always free. We prefer to come over to you to see the job, because measurements, levels, drainage and access are visible on site. Your quote follows after the visit.
Ask what is under the tarmac. The base is where a low price usually comes from. Read more on the pricing page.
Tarmac Against Other Drive Surfaces
| What matters | Tarmac | Block paving | Imprinted concrete | Resin bound |
|---|---|---|---|---|
| How it is made | Hot layers rolled over a compacted base | Blocks on a bedding layer, locked by joint sand | Poured concrete stamped with a pattern | Stone mixed with resin and trowelled onto a base |
| Colour and pattern | Black, with few colour options | Many colours and patterns | Colour and stamped patterns | Natural stone colours and mixes |
| Joints | None, one continuous surface | Many, kept full with sand | Cut joints in the slab | None, one continuous surface |
| Repairs | Patch the damaged area | Lift and relay single blocks | Repairs can show against the original colour | Patches can show where new meets old |
| Water | Usually solid, so water needs a fall to a drain | Can be built permeable | Solid, so water needs a fall to a drain | Can be built permeable on a permeable base |
Pick tarmac if you want one smooth surface and a quick job. Compare block paving, imprinted concrete and resin bound drives, or add patios and paths beside it.
Other Driveway Surfaces We Lay
Driveway Surfaces
FAQs
Do I need planning permission for a tarmac drive in Derby?
Laying more than 5 square metres of standard tarmac in a front garden needs planning permission, unless rain drains to a lawn or border. Porous asphalt needs none at any size. Derby City Council is the planning authority in Derby.
Why is tarmac laid hot?
Hot tarmac is workable, so it can be spread and rolled into a tight, dense layer. Once it cools it can no longer be compacted properly, so each layer is rolled straight away.
Can a tarmac drive be repaired?
Yes. A damaged patch is cut back to sound tarmac, the base is checked and new material goes in. A crack that keeps returning usually points to the base.
Can you lay new tarmac over my old drive?
Sometimes. It depends on how sound the old surface and base are. We look at the drive at the visit and tell you whether resurfacing or a full dig is the better fit. See driveway resurfacing for the details.
Do you work outside Derby?
Yes. We work in Derbyshire, Nottinghamshire and Leicestershire. The council that covers your address sets the rules, so the visit starts with where the drive is.
See the Job Before You Decide
We visit to see the job. We look at the levels, the drainage and the access, and talk through the finish and the edges with you. Your estimate is free, and your quote follows after the visit.



